After the ad hoc Internet sharing is no longer needed, you can restore the configuration of the ICS host computer running Windows XP by doing the following: 1. From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. 2. Right-click the Ethernet network connection that is used to access the Internet, and then click Properties.
To connect each other laptop computer to the newly created ad hoc mode wireless network, do the following: 1. Once the new ad hoc wireless network is created, Windows XP on other laptop computers should detect it and prompt you with a One or more wireless networks are available or Wireless networks detected message in the notification area of your taskbar. 2. Click the notification message.
To create an ad hoc wireless network to share Internet access with the other WLAN computers on a computer running Windows XP with SP2 or Windows XP with SP1 and the WPA Wireless Security Update in Windows XP, do the following: 1. From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. 2. Right-click the wireless network connection, and then click Properties. 3. Click ...
To enable Internet sharing on the Internet connection of the ICS host computer, do the following: 1. From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. 2. Right-click the Ethernet network connection that is used to access the Internet, and then click Properties.
Connect an Ethernet cable that leads to the Internet to the Ethernet adapter on the ICS host computer. In many cases, the Internet connection will provide automatic IP addressing. To utilize this facility of the Internet connection, the Ethernet connection in the Network Connections folder in Windows XP must be configured for automatic addressing. To configure a computer running Windows XP for automatic addressing, do the following:
Ethernet is the most-often used method of connecting personal computers together to form a network because it’s fast and its equipment is relatively inexpensive. In addition, Ethernet can be transmitted over several types of network cable or sent through the air by using wireless networking equipment. Many new computers have an Ethernet connection built in, ready for you to plug in a network cable. The most popular wireless ...
As you probably know, computer files are created any time that you use a computer. If you use a word processing program such as Microsoft Word to write a document, Word saves the document on your computer’s hard drive as an electronic file. Similarly, if you balance your checkbook by using Intuit Quicken, this software saves your financial data onto the computer’s drive in an electronic file. A computer ...
"My VLAN Sample Configuration on CISCO Catalyst 2960G VLAN 2 Connected to NET1 192.168.0.0/16VLAN 3 Connected to NET ASTINET VLAN 4 Connected to NET INHERENT " Current configuration : 5100 bytes ! ! Last configuration change at 13:21:42 WIB Tue Sep 25 2007 by ictitb ! version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption !
Masih tentang Load balancing, Bedanya sekarang kita akan menggunakan cisco 25xx,atau26xx bukan FreeBSD. contoh implementasi;
Cara membuat MsLooping Dynamips/GNS3 sangat mudah sekali Saya menerangkan dulu, gunanya adalah 1.Dgn ada MsLooping Dynamips ini kita menggunakan program seperti Putty, sdm, vpcs, dll skemanya secara kasar adalah dynamips/gns router secara virtual masuk ke pc melewati mslooping dynamips yg kita buat, ingat bukan masuk ke NEC "lan card device" lihat deh dibawah ini saat kita klick program device network list dr dynamips/gns oww iyaa, untuk yg memakai vista jgn khawatir bisa ...
Next,
Arsip Blog.
Stay updated on my meandering thoughts & activities via RSS (Syndicate).
